Fike Fire Alarm Systems — Intelligent Detection, Integrated Suppression Control

Suppression Systems, Inc. (SSI) is the certified East Coast distributor and service provider for Fike fire alarm and suppression systems. We design, install, program, and service Fike systems across Pennsylvania, New Jersey, Maryland, Virginia, and Delaware.

Fike panels are built for environments where standard fire alarm technology isn’t enough — data centers, industrial process areas, clean agent rooms, and any facility where the fire alarm system must directly command suppression, coordinate building systems, and respond in fractions of a second. The Fike platform is engineered as a releasing panel system from the ground up, not a standard alarm panel adapted for suppression control.

Every Fike system SSI delivers is designed to meet NFPA 72 and NFPA 2001 requirements — fully commissioned, tested, and documented.

---

What Makes Fike Different From a Standard Fire Alarm System

Most fire alarm panels are designed to detect, alert, and notify. Fike panels are designed to do all of that — and to directly command the suppression system, coordinate HVAC shutdown, close dampers, initiate elevator recall, and manage the entire response sequence as a single, unified, timed event.

The distinction matters most in special hazard environments where a slow, disconnected response means asset loss, environmental damage, or life safety failure. For those environments, a releasing panel is not optional — it is the code requirement. Fike builds releasing capability into the core architecture of every panel in its lineup.

• Purpose-built releasing panels — not adapted general-purpose alarm panels, but systems designed from the start for detection-to-suppression coordination
• Quarter-second response — the Fike Cheetah Xi responds from alarm to activation in 0.25 seconds, among the fastest response times in the industry
• No single point of failure — peer-to-peer network architecture means no hub or controller failure can take down the system
• Multi-system coordination — suppression release, HVAC shutdown, damper control, elevator recall, and mass notification managed within one platform
• Cross-zoned detection logic — requires confirmation from two independent detection zones before initiating suppression release, minimizing false discharge

Not sure if your current fire alarm and suppression systems are properly integrated? Read our guide on fire alarm and suppression integration →

---

The Fike Panel Lineup — Which System Is Right for Your Facility?

Fike’s panel family covers the full range of special hazard and life safety applications — from compact single-zone clean agent rooms to large multi-building networked campuses with integrated voice evacuation. SSI selects and programs the right panel for your facility’s specific hazard profile, size, and code requirements.

---

Integrated Suppression Control — What Fike Releases and Manages

Fike panels are the detection and control nerve center for the suppression systems SSI installs. When a confirmed fire condition is detected, the Fike panel initiates the full coordinated response — automatically and in the correct sequence:

• Clean agent systems — FM-200, ECARO-25, and SF-1230/FK-5-1-12 (Novec 1230) for data centers, server rooms, telecom, and archives
• CO₂ suppression systems — for industrial process equipment, printing, marine, and industrial storage
• Water mist deluge valves — coordinated release for water mist suppression systems in generator rooms and other applications
• Dry chemical systems — industrial and process hazard applications
• HVAC shutdown and damper control — stops airflow before agent release to prevent dilution and contain fire spread
• Elevator recall — coordinated building response per NFPA 72

For a deeper look at how this works and why disconnected systems create compliance and safety gaps: Fire Alarm and Suppression System Integration — What Facilities Need to Know →

For details on the Fike fire suppression panels →

---

Advanced Detection Technologies That Feed the Fike Platform

Fike panels are designed to integrate with a full suite of high-performance detection technologies — each suited to specific hazard types and environments where standard smoke detectors aren’t adequate:

Detection Technology	Best Suited For	Key Capability
Flame Detectors	Industrial, process, and high-ceiling environments	Detects ignition in less than 5 milliseconds with false alarm immunity
Air Sampling (QualiFire)	Data centers, clean rooms, telecom	Continuously samples air for incipient smoke — detects fire before visible smoke develops
Video Analytics	Large open spaces, warehouses, atriums	Identifies smoke, oil mist, and flame movement via camera-based detection
Linear Heat Detection	Conveyors, cable trays, ducts, cold storage	Cable-based continuous heat sensing along extended runs

See the full range of advanced detection options available through SSI: Advanced Fire Detection Systems →

For video-based detection in warehouses and large open spaces: Video Fire Detection Systems (VFD) →

---

Where Fike Fire Alarm Systems Are Used

Fike systems are the right choice for facilities where the fire alarm system must do more than alert — it must actively command a coordinated, timed suppression response. SSI has deployed Fike systems across:

• Data centers and server rooms — ultra-fast detection, clean agent integration, air sampling, and false discharge prevention
• Industrial and manufacturing facilities — CO₂, dry chemical, and foam suppression control for process equipment and high-value machinery
• Telecommunications and network operations centers — continuous air sampling and compact releasing panels for critical infrastructure
• Healthcare facilities — integrated life safety systems with voice evacuation and mass notification for large campuses
• Government and military installations — NFPA-compliant releasing systems with network survivability requirements
• Museums, archives, and cultural institutions — clean agent systems protecting irreplaceable collections
• Energy and utilities — suppression control for turbine rooms, switchgear, and control facilities

---

NFPA Compliance — Designed, Installed, and Documented by SSI

Every Fike system SSI delivers is designed and commissioned to meet the full applicable code stack for integrated detection and suppression systems:

• NFPA 72 — National Fire Alarm and Signaling Code, governing detection, alarm sequencing, releasing service, and documentation requirements
• NFPA 2001 — Standard on Clean Agent Fire Extinguishing Systems, governing detection and releasing requirements for clean agent applications
• NFPA 13 / NFPA 15 — for sprinkler and water spray systems where Fike provides the releasing control
• UL 864 — UL listing standard for fire alarm control units, including releasing devices
• UL 2572 — for mass notification systems incorporating the Fike FCP ECS panels
• UL / FM-certified commissioning — full acceptance testing, documentation, and sign-off at project completion

SSI handles design documentation, permitting coordination, commissioning, operator training, and annual inspection under NFPA 72 and NFPA 2001 schedules — so compliance is maintained throughout the system’s operational life, not just at installation.

---

Why SSI for Fike?

For over 40 years, Suppression Systems, Inc. has been building fire alarm and suppression systems around Fike technology. We understand both sides of the system — detection and suppression — because we design and install both. That means the integration is engineered correctly from the start, not improvised in the field.

• Certified Fike distributor — factory-trained engineers with deep product knowledge across the full Fike panel and detection lineup
• Single-source accountability — SSI designs the fire alarm system, the suppression system, and the integration between them; no handoff gaps between contractors
• Full lifecycle support — design, installation, commissioning, annual inspection, service, and system upgrades under one provider
• Regional code knowledge — we understand the AHJ requirements across Pennsylvania, New Jersey, Maryland, Virginia, and Delaware
• 40+ years of special hazard experience — from data centers and industrial facilities to museums and government buildings

---

Explore the Full Fike System at SSI

Fike Fire Alarm and Suppression Panels:

• Fike Fire Suppression Panels
• Video Fire Detection Systems (VFD) for Large Spaces and Warehouses

Integration and Application Guides:

• Fire Alarm and Suppression System Integration — What Facilities Need to Know
• Design Considerations for Special Hazard Fire Suppression

Suppression Systems Fike Controls:

• Clean Agent Fire Suppression Systems
• CO2 Fire Suppression Systems — NFPA 12 Guide
• Fike CO2 Systems
• Dry Chemical Fire Suppression
• Fire Suppression Systems — SSI Full Overview

Related Fire Alarm and Life Safety:

• Fike at SSI — Full Overview
• Fire Alarm and Detection Systems — SSI Overview
• Emergency Communication and Mass Notification
• Advanced Fire Detection Systems